JLG T500J Operator Manual - Manual (Page 27)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121197 – JLG Lift – 2-5
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE IMMEDI-
ATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PERSONNEL. DO NOT
OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR OPERATION.
Function Check
Perform the Function Check as follows:
1. From the ground control console with no load in the plat-
form:
a. Check that all guards protecting the function control
switches and controllers are in place;
b. Operate all functions;
c. Ensure that all machine functions are disabled when
the Emergency Stop Button is pushed in.
d. Ensure all boom functions stop when the function
enable switch is released.
2. With the platform in the stowed position:
a. Check that telescope out and lift up above horizontal
are disabled with the outriggers retracted and the
boom out of transport position.
3. From the platform control console:
a. Ensure that the control console is firmly secured in the
proper location;
b. Check that all guards protecting the function control
switches and controllers are in place;
c. Operate all functions;
d. Ensure all boom functions stop when the function
enable switch is released.
e. Ensure that all machine functions are disabled when
the Emergency Stop Button is pushed in.