JLG T500J Operator Manual - Manual (Page 113)

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121197 – JLG Lift – 7-9
7.3 OPERATOR MAINTENANCE
NOTE: The following numbers correspond to those in Figure 7-1., Oper-
ator Maintenance & Lubrication Diagram.
1. Wheel Bearings
Lube - MPG
Interval - every 12 months or 12,000 miles
Comments - Refer to the Service Manual for procedure
Table 7-14. Lubrication Specifications
KEY SPECIFICATIONS
MPG Multipurpose Grease having a minimum dripping point of 350
degrees F. Excellent water resistance and adhesive qualities; and
being of extreme pressure type (Timken OK 40 pounds minimum).
EPGL Extreme Pressure Gear Lube (oil) meeting API Service Classification
GL-5 or Mil-Spec Mil-L-2105.
HO Hydraulic Oil. API Service Classification GL-3, SAE 10W-20, Viscosity
Index 152, e.g. Mobilfluid 424.
EO Engine (crankcase) Oil. Gas - API SF/SG class, MIL-L-2104. Diesel - API
CC/CD class, MIL-L-2104B/MIL-L-2104C.
OGL Open Gear Lubricant - Mobiltac 375 or equivalent.