JLG 600SC_660SJC Service Manual - Manual (Page 128)

SECTION 5 - CAT CHASSIS (S/N 0300128000 TO PRESENT)
5-36 – JLG Lift – 3121157
Table 5-3. List of Subsidiary Material
No. Parts Name Standard Type and Dimensions
Applicable Components
or Parts
1 Spring balance 196 N-m or more (1-1), (1-4)
2 Seal tape (1-7), (1-8), (45)
3 Engine oil Equivalent to SAE 30CD class
4 Refined kerosene JIS K 2203 Equivalent to No.2
5 Thinner
6 Lapping plate For correcting sliding surfaces (5), (7), (15), (26)
7 Lapping agent #1000 (5), (7), (15), (26)
8 Copper plate (32), (33)
9
Grease Shell Albania Grease 2 (1-2), (1-28), (4), (18), (20),
(21), (22), (26), (30), (31),
(38-7), (38-14), (38-17),
(38-18), (42), (61)
10 Tube brush For washing inside of bore (7), (32)
11 Bamboo brush For washing
12 Oil pan For receiving hydraulic fluid
13 Plastic container Containing grease
14 Waste cloth
Table 5-4. List of Tightening Torque
Parts Name Nominal Size
Hexagon Width Across
Flats (mm)
Tightening Torque
Applicable Components
or Parts (1)
Plug PT 3/8 8
25 ft lb (± 3)
34.3 N-m (±4.9)
(1-5)
Plug PT 1/4 6
9 ft lb (± 1)
12.3 N-m (±2.5)
(1-7)
Plug PT 1/2 10
32 ft lb (±3)
44.1 N-m (±4.9)
(1-8)
Plug PF 3/4 12
115 ft lb (± 5)
157 N-m (±8)
(1-8)
Screw M10 Special type
25 ft lb (± 3)
34.3 N-m (±4.9)
(1-14)
Socket head bolt M8 6
21 ft lb (± 1)
29.4 N-m (±2.0)
(1-29)
Plug NPTF1/16 3.96
7 ft lb (±0.7)
9.8 N-m (±1.0)
(1-30), (45)
Orifice M5*0.8*5L 2.5
2 ft lb (±0.36 )
2.45 N-m (±0.49)
(19), (36)
Plug 27
275 ft lb (±15 )
373 N-m (±20)
(38-6)