JLG 4017 Operator Manual - Manual (Page 70)

Section 4 - Attachments
4-4 3121857
Sample Capacity Chart
Note: This is a sample capacity chart only! DO NOT use this chart, use the one
located in your operator cab.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on
machine being on firm ground with frame level (see page 3-6); the forks being
positioned evenly on carriage; the load being centered on forks; proper size tires
being properly inflated; and the telehandler being in good operating condition.
Failure to comply could result in death or serious injury.
XXXXXXX
EN 1459 B (1998)
XXXX
P/N 1122334
P/N 9988776
P/N 1234567
P/N 9876543
4.000kg
3.500kg
3.000kg
2.500kg
2.000kg
1.500kg
1.000kg
500kg
750kg
400kg
0
m
9
0°
10°
20°
30°
40°
50°
60°
70°
A
B
C
D
E
F
G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
8 7 6 5 4 3 2 1 0
2000kg
OZ0640
Boom Extension
Indicator (arc)
Load zones indicate
the maximum weight
that may be safely lifted.
These numbers must match the
model/option number stamped
on the attachment ID Plate.
Boom Angle
This Capacity Chart may be
used with this model ONLY.
The model of your
telehandler is indicated on
the boom or chassis.
Model XXXX is used for
demonstration purposes only.