Section 7 - additional checks, 1 load moment indicator test, 1 load moment indicator test -1 – JLG 4017 Operator Manual User Manual

Page 111

Text mode
Original mode

Section 7 - Additional Checks

7-1

3121857

SECTION 7 - ADDITIONAL CHECKS

7.1

LOAD MOMENT INDICATOR TEST

The Load Moment Indicator (LMI) is intended to continuously monitor the forward
stability of the telehandler. To check this feature, perform the following:

1. Fully retract and level boom, with no load. Do not raise the boom during

this test.

2. Level frame using level in cab.

3. Press the test button on the LMI display. This will cause all LEDs to flash on and

an audible warning to sound. This indicates that the system is functioning
properly. If the test gives a different result, the system is not functioning properly
and the machine must be removed from service and repaired before continued
operation.

OW1150

OZ0840