beautypg.com

Hydraulic oil, Hydraulic oil -13 – JLG 4017 Operator Manual User Manual

Page 105

background image

Section 6 - Lubrication & Maintenance

6-13

3121857

Hydraulic Oil

A. Hydraulic Oil Level Check

1. Be sure all cylinders are fully retracted and machine is level.

2. Perform “Shut-Down Procedure” on page 3-4.

3. Check level of hydraulic oil at the sight gauge (6) on the hydraulic tank (5). The

oil level should be visible in the gauge window.

4. If hydraulic oil is low, remove oil fill cap (7) from filler neck. Add Mobilfluid

®

424

tractor hydraulic fluid to bring oil up to the upper mark on the sight gauge.

5. Replace hydraulic oil fill cap.

8

OW1150

OW1030

6

5

7

OZ0410

See also other documents in the category JLG Special machinery: