JLG 3246E2 ANSI Service Manual - Manual (Page 61)

SECTION 2 - PROCEDURES
3120737 – JLG Lift – 2-47
2.26 ANALYZER MENU STRUCTURE
In the following structure descriptions, an intended item is
selected by pressing ENTER; pressing ESC steps back to
the next outer level. The LEFT/RIGHT arrow keys move
between items in the same level. The UP/DOWN arrow
keys alter a value if allowed
Table 2-9. Analyzer Menu Structure
TOP LEVEL MENU SUB LEVEL MENU
ITEM TO BE VIEWED
OR CHANGED
DESCRIPTION DISPLAY
HELP;PRESS ENTER
HELP
LOGGED HELP Displays current help/fault message
Log of most recent help/fault messages: LEFT/RIGHT view
DIAGNOSTICS ASPC IN...
PLATFORM
JOYSTICK
STEER
POSI-TRAC
HIGH DRIVE
TRIGGER
DRIVE
LIFT
DECK
Displays current controller mode.
NEUTRAL/DRIVE/FORWARD/LIFT/etc.
Displays joystick demand 0%...100% Preceded by “+” for
forward/up/out, or by “-” for reverse/down/in.
Displays steer status. (NONE/LEFT/RIGHT/etc.)
Displays posi-trac switch status (OPEN/CLOSED)
Displays high drive switch status (OPEN/CLOSED)
Displays trigger switch status (OPEN/CLOSED)
Displays drive mode select switch status (OPEN/CLOSED)
Displays lift mode select switch status (OPEN/CLOSED)
Displays deck mode select switch status (OPEN/CLOSED)
Not displayed if POWER DECK = NO
GROUND
UP
DOWN
OUT
IN
Displays ground lift up switch status (OPEN/CLOSED)
Displays ground lift down switch status (OPEN/CLOSED)
Displays ground deck out switch status (OPEN/CLOSED)
Not displayed if POWER DECK = NO
Displays ground deck in switch status (OPEN/CLOSED)
Not displayed if POWER DECK = NO