Brother CS 80 - Manual (Page 32)

GETTING READY ————————————————————————————————————————————————————————
26
Using the twin needle
Using the twin needle, you can sew two parallel
lines of the same stitch with two different colors.
Both upper threads should have the same thickness
and quality. Be sure to use the enclosed twin needle
and the extra spool pin.
For details on the stitches that can be sewn with the
twin needle, refer to “ Stitch Settings” (page 96).
1
Remove the needle.
• For details, refer to “ Replacing the needle”
(page 32).
2
Load the spool for the first thread color into
the thread cassette.
Thread the thread cassette up to arrow 2,
indicated on the thread cassette.
• For more details, refer to steps
1
through
9
in “ Loading the spool into the thread
cassette” (page 19).
3
Load the spool for the second thread color
onto the extra spool pin.
• For more details, refer to steps
1
through
4
in “ Using the extra spool pin” (page 24).
4
Use the two threads to thread the thread
cassette, and then cut the threads.
Thread the thread cassette along arrows 3
through 6, indicated on the thread cassette.
• For more details, refer to steps
0
through
c
in “ Loading the spool into the thread
cassette” (page 19).
● Only use the twin needle (Part code :
X59296-051).
Use of any other needle may bend the
needle or damage the machine.
● Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
● Do not try installing the twin needle
while the thread cassette is not installed,
otherwise the needle may break or
damage to the machine may result.
CAUTION
S2_brotherE.book Page 26 Thursday, February 13, 2003 11:03 AM