Brother CS 80 - Manual (Page 2)

Cover A
Enclosed Accessories
After opening the box, check that the following accessories are enclosed. If any item is missing or damaged,
contact your retailer.
Accessories
1. 2. 3. 4. 5. 6. 7. 8. 9.
10.* 11. 12. 13. 14. 15. 16. 17. 18. 19.
20. 21. 22. 23. 24. 25.
* 75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name
Part Code
No. Part Name
Part Code
U.S.A. Others U.S.A. Others
1 Buttonhole foot “A” XC2691-051 14 Screwdriver XC4237-021
2 Overcasting foot “G” XC3098-051 15 Spool cap (large) 130012-054
3 Monogramming foot “N” X53840-351 16 Spool cap (small) 130013-154
4 Zipper foot “I” X59370-051 17 Extra spool pin XC3834-021
5 Zigzag foot “J” (on machine) XC3021-051 18 Spool net XA5523-050
6 Blind stitch foot “R” XC4051-051 19 Foot controller XC1154-021
7 Button fitting foot “M” X59375-151 20 Thread cassette (on machine) XC3664-021
8 Seam ripper X54243-001 21
Spool cap (orange)
(on machine)
XC3673-021
9 Bobbin (4) SA156 XA5539-151 22 Needle-changing tool XC4551-021
10 Needle set X58358-051 23 Operation manual XC5247-021
11 Twin needle X59296-051 24 Quick reference guide XC5256-021
12 Cleaning brush X59476-051 25 Spool cap (special) XA5752-021
13 Eyelet punch 135793-051
Note
(For U.S.A. only)
● Foot controller: Model N5V
This foot controller can be used on this machine model CS-8060/CS-80.
● The screw of the presser foot holder is available through your authorized dealer.
(Part code: XA4813-051)
S2_brotherE_Cover2.fm Page A Tuesday, March 30, 2004 1:36 PM