JLG 660SJ Operator Manual - Manual (Page 91)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121297 – JLG Lift – 6-5
NOTE: When temperatures remain below 20° F (-7 degrees C),
JLG Industries recommends the use of Mobil DTE 13M.
Aside from JLG recommendations, it is not advisable to mix
oils of different brands or types, as they may not contain the
same required additives or be of comparable viscosities. If
use of hydraulic oil other than Mobilfluid 424 is desired, con-
tact JLG Industries for proper recommendations.
Table 6-8. Mobilfluid 424 Specs
SAE Grade 10W30
Gravity, API 29.0
Density, Lb/Gal. 60°F 7.35
Pour Point, Max -46°F (-43°C)
Flash Point, Min. 442°F (228°C)
Viscosity
Brookfield, cP at -18°C 2700
at 40° C 55 cSt
at 100° C 9.3 cSt
Viscosity Index 152
Table 6-9. Mobil DTE 13M Specs
ISO Viscosity Grade #32
Specific Gravity 0.877
Pour Point, Max -40°F (-40°C)
Flash Point, Min. 330°F (166°C)
Viscosity
at 40° C 33cSt
at 100° C 6.6 cSt
at 100° F 169 SUS
at 210° F 48 SUS
cp at -20° F 6,200
Viscosity Index 140