1 introduction, 2 operating specifications, 1 introduction -1 6.2 operating specifications -1 – JLG 660SJ Operator Manual User Manual
Page 87: Operating specifications -1
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121297
– JLG Lift –
6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual - Global Spec
(s/n 0300171769 to Present) ................................. 3121298
Illustrated Parts Manual - Global Spec
(s/n 0300171769 to Present) ................................ 3121299
6.2 OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications
Maximum Work Load (Capacity)
ANSI
Unrestricted:
Restricted:
500 lb (227 kg)
1000 lb (454 kg)
Maximum Travel Grade (Gradeability)
2WD
4WD
30%
45%
Maximum Travel Grade (Side Slope)
5°
Turning Radius (outside)
- 2WS
- 4WS
17 ft. 7 in. (5.36 m)
9 ft. 6 in. (2.89 m)
Turning Radius (inside)
- 2WS
- 4WS
7 ft. 4 in. (2.23 m)
4 ft. 7 in. (1.40 m)
Maximum Tire Load:
600S
660SJ
11,800 lbs. (5352 kg)
14,200 lbs. (6441 kg)