3 product description, 1 main illustration, 2 overview – Eppendorf Excella E-10 Classic Platform Shaker User Manual
Page 9: Product description 3.1, Main illustration, Overview, 3product description 3.1 main illustration
Product description
New Brunswick Excella® E-10 Open Air Shaker
English (EN)
9
3
Product description
3.1
Main illustration
Abb. 3-1: Excella E-5 side and rear view
Fig. 3-1:
Excella E-10 side and rear view
3.2
Overview
The Excella
E-10 is a portable benchtop shaker utilizing a UniCentric™ single eccentric counterbalanced
drive to provide horizontal plane rotary motion in a 2.54
cm
(1
in)
circular
orbit.
A
Proportional/Integral
(PI)
Microprocessor controller with instantaneous digital feedback controls the speed over a range of 50
rpm
–
400
rpm
.
The shaker may be operated either continuously or in a timed mode via a programmable timer for shaking
periods of 0.1
–
99.9
h.
The E-10 is equipped with visual and audible alarms which are activated when an alarm condition exists, as
follows:
• The end of a timed run
• Deviations of shaking speed
• Power failure
A wide variety of platforms can be used with the E-10. Dedicated platforms are available for a variety of
flask sizes. Universal platforms, and test tube racks are also available.
1
ON/OFF switch
2
Control panel
3
Electrical specification plate
4
Power receptacle
5
Platform
1
2
5
4
3