Eppendorf Excella E-10 Classic Platform Shaker - Manual (Page 12)

Installation
New Brunswick Excella® E-10 Open Air Shaker
English (EN)
12
Operating Environment
The shaker is designed to operate optimally in the following ambient conditions:
• 5 – 45 °C
• 20 – 80 % Relative Humidity non-condensing
• Up to 2000 m
4.3 Electrical requirements
The Excella E-10 can be equipped to run on:
• 100/120 volts, 50/60 Hz, 1500 VA maximum
• 230 volts, 50/60 Hz, 1500 VA maximum
In all cases, voltage variations must not exceed ±10 %.
4.4 Installing a platform
The shaker is shipped with the four Allen (hexagonal, countersunk) head platform screws installed in the
upper bearing housing. These screws must be removed before installing a platform. The Allen key is
provided.
A platform must be installed on the shaker prior to use.
WARNING!
 Unplug the shaker before installing the platform.