Eppendorf Excella E-10 Classic Platform Shaker - Manual (Page 17)

Operating controls and function
New Brunswick Excella® E-10 Open Air Shaker
English (EN)
17
5 Operating controls and function
5.1 Control panel
The control panel consists of the status indicators, LED display, function indicators, and the user interface
keys.
Abb. 5-1: Control panel
Fig. 5-1: Control panel
5.1.1 Status indicators
4 status indicator lights are located to the left of the LED DISPLAY. They are:
*Not applicable for the E-2, E-5, and E-10
1 Status indicators
2 LED display
3 Function indicators
4 User interface keys
SET Indicates that the shaker is in the SET MODE, when setpoints are being
displayed and can be altered. This is activated by the SELECT key or by
pressing the
▲(UP) or ▼(DOWN) KEY.
POWER Illuminates and blinks during power up or if power is interrupted during a run.
Press the
SELECT key and change to another function to turn off this indicator.
HEAT* Illuminates to indicate that the heater is on.
TIME Indicates that the timer is in operation. The shaker can be programmed to run
for a preset time from 0.1 to 99.9 hours. The timer can be disengaged without
stopping an ongoing run.
1 2 3 4