Eppendorf Excella E-10 Classic Platform Shaker - Manual (Page 22)

Operation
New Brunswick Excella® E-10 Open Air Shaker
English (EN)
22
3. Press the START/STOP KEY. The shaker will stop and the display will read OFF.
4. Press the START/STOP KEY again; the TIME INDICATOR will light and the shaker will start the timed
run.
If the shaker is stopped:
5. Press the START/STOP KEY. The shaker will start in untimed mode.
6. Press the START/STOP KEY again. The shaker will stop and the display will read OFF.
7. Press the START/STOP KEY a third time; the TIME INDICATOR will light and the shaker will start the
timed run.
To disable the visual alarm (flashing TIME INDICATOR), press the SELECT KEY and change to any other
function.
To cancel the timer without stopping the shaker:
Repeat Steps 1 and 2, then immediately press the START/STOP KEY. The TIME INDICATOR will cease to
flash and the display will read OFF.
6.5 Alarm Functions
In addition to visual alarm, the Excella E-10 has an audible alarm that is activated at predetermined times.
It can be deactivated by using the MUTE function:
1. Press the SELECT key until the MUTE indicator illuminates.
2. Press the ▲(UP) or ▼(DOWN) KEY to display ON, then press the SELECT KEY.
To reactivate the audible alarm:
1. Press the SELECT key until the MUTE indicator illuminates.
2. Press the ▲(UP) or ▼(DOWN) KEY to display OFF, then press the SELECT KEY.
6.6 Power Failure
In the event of a power failure, the Excella E-10 is equipped with an automatic restart function.
If the shaker was in operation prior to the power interruption, when power is restored the shaker will begin
to operate at its last entered setpoint. The LED DISPLAY will flash and the audible alarm will sound,
indicating that a power failure has occurred. Press any key to stop the flashing in the display and the
audible alarm.
If the shaker is stopped, skip to Step 5. If the shaker is already running continue to Step 3.