Eppendorf Innova 2050 Digital Platform Shaker - Manual (Page 26)

Maintenance
New Brunswick Innova® 2000/2050 Shaker
English (EN)
26
To replace fuses (without changing the fusing arrangement):
1. Disconnect the unit from the power source.
2. Using a small screwdriver, remove the cover/fuse block located on the rear of the unit.
3. Remove the old fuse.
4. Insert a new one of the same type.
5. Replace the cover/fuse block into the power module.
Abb. 6-1: Power entry module
Fig. 6-1: Power entry module
Spare fuses are supplied with the unit.
1 Housing
2 Voltage selector card
3 Indicator pin
4 Cover
5 Fuse block
4 5
3 2 1