4 installation, 1 unpacking, 2 checking voltage configuration – Eppendorf Innova 2050 Digital Platform Shaker User Manual
Page 17: 3 space requirements, Installation 4.1, Unpacking, Checking voltage configuration, Space requirements, 4installation 4.1 unpacking
Installation
New Brunswick Innova® 2000/2050 Shaker
English (EN)
17
4
Installation
4.1
Unpacking
When you unpack the unit, inspect it carefully for any apparent damage that may have occurred during
transit. Report any damage to the carrier and to Eppendorf Service Department.
Verify against the packing list that you have received everything; report any missing items to your
Eppendorf representative.
4.2
Checking voltage configuration
Determine the voltage of your unit by checking the voltage selector and the label on the rear of the unit,
and confirm that the correct electrical service package is included with the unit.
4.3
Space requirements
It is essential that the unit be situated in an area where there is sufficient space for the shaker and platform
to clear walls and other potential obstructions during operation.
The dimensions, including a platform but excluding glassware, are:
The required surface area required for operation is:
Do not discard the crate or packing material.
WARNING! Risk of electric shock and/or damage to device!
Do not plug the shaker into a power source until you check the voltage and frequency
settings.
Model
Width
Depth
Height
Innova 2000
35
cm
(14
in)
36
cm
(14
¼
in)
13.9
cm
(5
3/8
in)
Innova 2050
43
cm
(17
in)
36
cm
(14
¼
in)
13.9
cm
(5
3/8
in)
Model
Width
Depth
Innova 2000
43
cm
(17
in)
43
cm
(17
in)
Innova 2050
50
cm
(20
in)
50
cm
(20
in)