Eppendorf Innova 2050 Digital Platform Shaker - Manual (Page 13)

Product description
New Brunswick Innova® 2000/2050 Shaker
English (EN)
13
3.4.3 Status indicators
3.4.4 Function indicators
3.5 Platform assemblies
Neither the Innova 2000 nor the 2050 can be used without a platform. One must be purchased and installed
on your shaker prior to operation (see
Platforms on p. 31).
The Innova 2000 can be used with a wide range of New Brunswick 28 cm x 33 cm (11 in × 13 in) platforms,
which will accept a variety of clamps for flasks, test tubes, etc (see Tab. on p. 31).
The Innova 2050 can accommodate an even wider range of New Brunswick 30.5 cm × 40.6 cm (12 in x
16 in) platforms, which will accept a variety of clamps for flasks, test tubes, etc (see Tab. on p. 31).
3.6 Heavy duty construction
3.6.1 Bearings
Innova shakers employ sealed lubricated ball bearings of the highest quality. Sealed bearings minimize the
generation of airborne particles that could be disadvantageous in clean rooms or controlled environment
areas.
SELECT • Changes the displayed parameter
• Temperature (°C) cannot be selected unless the temperature/remote monitoring
option is installed.
MAINT • Illuminates after 10000 hours of use. Indicates need for routine maintenance (see
Routine maintenance on p. 25)
SET Illuminates to indicate that:
• Shaker is in SET mode
• Setpoints are being displayed
• Setpoints can be altered
TIME • Illuminates to indicate that the timer is in operation
MUTE • Illuminates to indicate that the audible alarm is disabled
RPM Revolutions per minute shaking speed
HRS Time remaining
°C Temperature function (only activated of the temperature/monitor option is installed)
* This function is not active in the Innova 2000/2050