Eppendorf Innova 2050 Digital Platform Shaker - Manual (Page 11)

Product description
New Brunswick Innova® 2000/2050 Shaker
English (EN)
11
3.2.2 Alarms
The Innova 2000/2050 is equipped with audible and visible alarms that alert the user to the following
conditions:
• The end of a timed run
• Deviation of shaking speed outside the tolerance limits
3.2.3 Platforms and accessories
To accommodate customer needs, a wide variety of platforms can be used with the Innova 2000/2050.
Dedicated platforms are available for a variety of flask sizes. Universal platforms are also available (see
Platforms on p. 31).
3.3 Universal power module
The power module contains a voltage card and fuse holder which are used to select the appropriate voltage
and fusing. This universal power entry system adapts to worldwide power requirements. Voltage and fusing
has been set prior to shipment. Innova shakers are available in 100
V, 120 V, 220 V and 240 V
configurations that accommodate both 50 and 60 Hz frequencies.
3.4 Control panel
The control panel is located on the front of the instrument. It serves as the operator interface, and consists
of:
• A START/STOP key
• An up arrow ( )
• A down arrow ( )
• A SELECT key
• A 3-digit LED display that provides numeric values, and some letter codes
• 4 function indicator lights
• 4 status indicator lights
WARNING! Risk of electric shock and/or damage to device!
 Do not plug the shaker into a power source until you check the voltage and frequency
settings.
 Check the voltage selection on the power entry module against the serial tag located either
on the side or rear of the device.