Eppendorf Thermomixer R - Manual (Page 22)

5 Operation
24
Thermomixer comfort / Thermomixer R — Operating Manual
6. Using the "Time" arrow keys, set the pause phase.
7. Press the "Start/Stop" key to start the interval function.
The device begins to alternate between mixing and mixing pause until the total time has
elapsed.
8. To terminate the function before the time is up, hold the "Interval Mix" key for more than 2
seconds.
The indicator lamp goes out and the display shows Off .
5.5.7 Programmable temperature control
The function "Programmable temperature control" enables a program run which consists of up to
two steps. The second step will be started automatically after the first step has been completed.
1. Hold the "Progr." key for more than two seconds.
The green indicator lamp in the key lights up. On the display appears the sign , to the left of
the temperature display.
2. Using the arrow keys, set the parameters. The interval mixing function can be used in
addition.
3. Briefly press the "Progr." key.
On the display appears the sign , to the left of the temperature display. You are now in the
second stage of the program.
4. Using the arrow keys, set the parameters. The interval mixing function can be used in
addition.
5. Press the "Start/Stop" key to start the program.
The program step which is currently visible on the display is now started. If it is the first step,
the second step is started automatically after the first step has been completed.
To end the program before the run is completed,
1. press the "Start/Stop" key again.
2. To return to the mode of basic temperature control, press the "Prog." key.
In the "Temp control" mode (see Time counting mode on page 21) the signs for the
individual programming steps appear.
5.5.8 Save the values
The set values will be saved even after the device has been switched off.
2h:15m
1400rpm
off
37 °C
--:--
0rpm
off
15/31 °C
EN
Operating Manual