Eppendorf Thermomixer R - Manual (Page 16)

5 Operation
18
Thermomixer comfort / Thermomixer R — Operating Manual
5.2 Inserting exchangeable thermoblocks
The following exchangeable thermoblocks can be set on the Thermomixer comfort /
Thermomixer R:
WARNING!
Warning! Risk of injury through chemical or mechanical damage to exchangeable
thermoblocks.
 Check the exchangeable thermoblocks regularly.
 Do not use exchangeable thermoblocks that show signs of corrosion or mechanical
damage.
WARNING!
Warning! Injury or property damage from improperly attached exchangeable
thermoblocks.
If the exchangeable thermoblocks are not attached properly, they can become detached
from the device or break.
 Tighten the screws of the exchangeable thermoblocks fingertight.
WARNING!
Warning! Contamination due to opening tube lids.
In the following cases, the lids of PCR tubes can spring open and the sample material
can escape:
•
high vapor pressure of the content
•
improperly sealed lid
•
damaged sealing lip
 Always check that micro test tubes have been sealed tightly before use.
Exchangeable thermoblock 0.5 ml: 24 x 0.5 ml micro test tubes
Exchangeable thermoblock 1.5 ml: 24 x 1.5 ml micro test tubes
Exchangeable thermoblock 2.0 ml: 24 x 2.0 ml micro test tubes
Exchangeable thermoblock Cryo: 24 x 1.5 or 2.0 ml Cryo tubes
Exchangeable thermoblock lab tubes: 24 tubes at 11 – 11.9 mm, height 30 to 76 mm
Exchangeable thermoblock 15 ml Falcon: 8 x 15 ml Falcon tubes
Exchangeable thermoblock 50 ml Falcon: 4 x 50 ml Falcon tubes
Exchangeable thermoblock MTP: MTP and DWP, PCR tubes and plates
Exchangeable thermoblock slides: 4 slides
Exchangeable thermoblock slides DC: 4 slides DC
Hint!
To insert the exchangeable thermoblocks, use the accessories supplied (e.g. screw
driver, screws, flat washers and lock washers).
EN
Operating Manual