Eppendorf Mastercycler pro - Manual (Page 75)

Maintenance
Mastercycler pro
English (EN)
75
4. Remove any contamination in the area of the block and on the inner side of the lid with a damp, lint-free
cloth. Use a neutral lab cleaner if necessary. Remains of markings from tube lids on the heating unit can
be removed with ethanol or isopropanol.
10.1.2.2 Moving the lid out of the cleaning position
1. While holding the front edge of the lid with your right hand, pull the stand 1forwards with your left
hand.
2. Lower the heated lid slowly until it locks into the horizontal position.
1 Lid release latches
2 Heating unit
3 Rollflex cable
4 Stand
Keep the block bores free of dust and lint.
Even small amounts of deposits can affect the heat transfer between the block and sample
tubes.
2
1
3
4
1
2