Eppendorf Mastercycler pro - Manual (Page 28)

Operation
Mastercycler pro
English (EN)
28
1. Pull vapo.protect heated lid forwards at the lid handle as far as possible so that the lid handle can be
rotated.
2. Flip the handle over the heated lid until it clicks into place.
You can now start a program run or manually temperature-control the lid and the samples.
5.1.1.2 Opening the heated lid
Open the heated lid in one go as follows:
 Flip the lid handle up over the heated lid and push the heated lid by the handle to the rear position until
it stops.
WARNING! Risk to health and bio hazard when operated with lid open.
The tube lids may pop open at high block temperatures.
 Close the lid of the device when heating samples.
WARNING! Risk of burns from the hot thermoblock and heated lid.
The thermoblock and the heated lid very quickly reach temperatures above 95 °C.
 Keep heated lid closed until the temperature of the thermoblock is below 30 °C.
2
1