2 other steps, Other steps, 2 setting up user accounts – Eppendorf Mastercycler pro User Manual
Page 32
Operation
Mastercycler pro
English (EN)
32
To define the administrator PIN, perform the following steps in the sequence described.
After successful confirmation of the administrator PIN, the navigation tree appears in the control panel
display. You are now logged in as the administrator.
5.2.2
Other steps
5.2.2.1 Setting the date and time
The date and time of the control panel are displayed in the upper right-hand corner of the display. As the
administrator you can change this internal clock at any time
.
5.2.2.2 Setting up user accounts
To be able to use the Mastercycler pro, you must set up at least one user account. Detailed information
about setting up user accounts and about user administration can be found separately(see Managing user
accounts on p. 55).
1. Switch on the Mastercycler pro at the mains power switch.
The
Input Admin PIN
window appears.
2. Enter the desired administrator PIN using the numerical keys on the control panel.
The PIN can be between 4 and 8 digits long.
3. Go to the
Confirmation
field and enter the PIN again to confirm.
4. If your two PIN entries do not match each other, an error message is displayed. In
this case, delete the incorrectly entered PIN and repeat the PIN entries.
5. Confirm by pressing the
OK
function key.
• If the
PIN
function is activated, you must define an administrator PIN. Otherwise this input
prompt will appear each time the device is switched on.
• You can also change the administrator PIN subsequently (see Changing the PIN on p. 56).
Delete
2
3
5
6
0
.
8
9
abc
jkl
mno
tuv
wxyz
def
1
7
pqrs
4
ghi
Next
Delete
Delete