IKA C 6000 isoperibol Package 2/12 - Manual (Page 46)

46
Working with the sample rack
To work with the sample rack you must fi rst check
that it is connected to the calorimeter.
Open the “Sample rack” screen from the main
menu.
After this you can use the „Use sample rack“
menu item to activate/ deactivate its use.
A schematic representation of the assignment
of the rack is displayed in the upper area of the
menu.
-> Green = free
-> Red = occupied
-> Grey = rack not connected/recognised
Working with the sample rack and balance
If a balance is connected to the IKA ® C 6000
global standards/isoperibol calorimeter, the
weighted sample can be sent directly from the
balance to the IKA
® C 6000 global standards/
isoperibol calorimeter.
There are two possibilities:
a) Press the “Print” button on the balance:
Pressing the “Print” button automatically opens
the preparation dialogue box and the
weighted sample value is entered automatically.
If External Energy 2 is not set to user-defi ned, the
fi rst weighted sample value is entered into the
weighted value fi eld for External Energy 2 and the
energy is calculated automatically.
If External Energy 2 is set to user-defi ned, the
weighted sample value is entered directly into the
test weighted value fi eld and the second weigh-
ted sample value is entered into the External Ener-
gy 3 fi eld (as long as it is not set to user-defi ned).
The energy values are calculated automatically
based on the weighted sample and
reference calorifi c value entered.
The sequence of fi gures transferred is as follows:
1. Weight External Energy 2 (if not user-defi ned)
2. Test weighted sample
3. Weight External Energy 3 (if not user-defi ned)
Displaying/hiding the sample rack
Displaying/hiding the sample rack