Belkin F6D4230-4 - Manual (Page 76)

74
Enhanced Wireless Router
sections
table of contents 1 2 3 4 5 6 8 9 10 7
ManUally ConfIgURIng nETWoRK sETTIngs
Manually Configuring network settings in Windows 2000, nT, XP, or Vista
1� Click “Start”, “Settings”, then “Control Panel”�
2� Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network” icon (Windows XP or Vista)�
3� Right-click on the “Local Area Connection” associated with your
network adapter and select “Properties” from the drop-down
menu�
4� In the “Local Area Connection Properties” window, click “Internet
Protocol (TCP/IP)” and click the “Properties” button� The screen on
the right will appear�
5� If “Use the following IP address” (2) is selected, your Router
will need to be set up for a static IP connection type� Write the
address information in the table below� You will need to enter this
information into the Router�
6� If not already selected, select “Obtain an IP address automatically”
(1) and “Obtain DNS server address automatically” (3)� Click “OK”�
your network adapter(s) are now configured for use with the Router�
(1)
(2)
(3)