Belkin F6D4230-4 User Manual
Page 46
44
Enhanced Wireless Router
sections
table of contents
1
2
3
4
5
7
8
9
10
6
UsIng THE WEb-basEd adVanCEd UsER InTERfaCE
1�
Wi-Fi Protected Setup (WPS): Enabled or Disabled�
2�
Personal Identification Number (PIN) Method: In this method, a
wireless client wishing to access your network must supply a 4- or
8-digit PIN to the Router� After clicking “Enroll”, you must start
WPS from the client within two minutes�
3�
Router PIN: If an external registrar is available, you may enter in the
Router’s PIN to the registrar� Click “Generate New PIN” to change
the PIN from the default value� Click “Restore Default PIN” to reset
the PIN value�
4�
Push Button Configuration (PBC) Method: PBC is an alternate
method to connect to a WPS network� Push the WPS button
located on the front of the Router for three seconds, and then
initiate the PBC on the client device� Alternatively, push the “Start
PBC” soft button to start this process�
5�
Manual Configuration Method: This section lists the default security
settings to be set up if not using WPS�