Aries Automotive P1050 User Manual

Page 3

Page 2 of 5

14.

Do periodic inspections of the installation to make sure that all hardware is secure and tight.

To protect your investment

, wax this product after installing. Regular waxing is recommended to

add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives

that could damage the finish.

For stainless steel

: Aluminum polish may be used to polish small scratches and scuffs on the finish.

Mild soap may be used also to clean the Grille Guard.

For gloss black finishes

: Mild soap may be used to clean the Grille Guard.

Passenger Side Installation Pictured

Fig 1A

2010-13 Passenger side Frame Mounting Bracket
bolts to the inner mounting location (pictured
with Grille Guard in position for example only)

Fig 1C

07-09 Passenger side Frame Mounting Bracket
bolts to the outer mounting location (pictured
with Grille Guard in position for example only)

Fig 1B

2007-13 Driver side Frame Mounting
Bracket installation (pictured with Grille
Guard in position for example only)

12mm x 30mm Hex bolt
(2) 12mm Flat Washers
12mm Nylon Lock Nut

Front