Snorkel X26N-sn51089+V-1 - Manual (Page 9)

Page 5
3 SPECIAL LIMITATIONS
3 SPECIAL LIMITATIONS
D A N G E R ! !
Travel with the platform raised is limited to creep speed range. Elevating the Work Platform is limited to
firm, level surfaces ONLY.
D A N G E R ! !
The elevating function shall ONLY be used when the work platform is level, and on a firm surface. The work
platform is NOT intended to be driven over uneven, rough, or soft terrain.
PLATFORM CAPACITY
The maximum capacity for the MACHINE, including occupants is determined by model and options, and is
listed in «Specifications» on page 20.
D A N G E R ! !
DO NOT exceed the maximum platform capacity or the platform occupancy limits for this machine.
MANUAL FORCE
Manual force is the force applied by the occupants to objects such as walls or other structures outside the
work platform. The maximum allowable manual force is limited to 200 N (45 lbs.) offeree per preson, with a
maximum of 400 N (90 lbs.) for two or more occupants.
D A N G E R ! !
DO NOT exceed the maximum amount of manual force for this machine.
LIFT OVERLOAD ALARM
All models include a feature that alerts the operator when the platform load is exceeded. If the alarm
sounds during the lift function, lower the platform and reduce the platform load.
D A N G E R ! !
NEVER operate the machine with a platform load greater than the rated capacity and never in wind
conditions that exceed the maximum allowable for this machine (Beaufort 4). Refer wind chart on page 7