Snorkel X26N-sn51089+V-1 - Manual (Page 15)

Page 11
7 OPERATION
GUARDRAILS
The guardrails may be lowered for the purpose of
passing through a standard doorway.
Guardrails must be returned to proper position
before using the machine.s
W A R N I N G ! !
DO NOT use the machine if all guardrails are not
properly in place and secured.
LOWERING PROCEDURE
Ensure that the platform extension is fully 1.
retracted and the deck lock pin is engaged (see
«Platform Extension» on page 9).
Place the Platform Controls on the deck of the
2.
platform extension.
Lower the platform extension guardrail;
3.
a. Pull to retract the retaining pins.
b. As the retaining pin is pulled, the rail will
drop slightly and hold the pin in the retracted
position.
c. Hold the mid-rail with one hand as you retract
the final retaining pin.
C A U T I O N ! !
The guardrail could drop suddenly when the final retaining pin is retracted. Keep hands away from the slide tubes to
prevent injury.
d. Push down on the platform extension guardrail to lower it completely.
e. The retaining pins will remain in the retracted position.
4. Lower the side guardrails and rear guardrail as a single unit;
• Repeat steps 3a through 3c.
5. Lower the rear top-rail;
• Pull the two retaining pins and lower the rear top-rail completely.
RAISING PROCEDURE
1. Raise the side guardrails and rear guardrail as one unit;
• Pull up on the side guardrails and raise them until all the retaining pins engage.
2. Raise the rear top-rail;
• Pull up on the rear top-rail until the retaining pins engage.
3. Raise the platform extension guardrail;
• Pull up on the platform extension guardrail and raise it until all the retaining pins engage.
4. Hang the controller on the platform extension guardrail.
Figure 6: Guardrails
1
2
3
4
5
4
1. Platform Extension
2. Platform Controls
3. Platform Extension Retaining Pins
4. Side-rail Retaining Pins
5. Rear Top-rail Retaining Pins
Retaining Pin Detail
Engaged Retracted
1. Platform Extension
2. Platform Controls
3. Platform Extension Retaining Pins
4. Side-rail Retaining Pins
5. Rear Top-rail Retaining Pins
Retaining Pin Detail
Engaged Retracted