Snorkel X Series-sn15020-19999 - Manual (Page 9)

Page 9 X Series
B Y C RANE
Secure straps to Lugs only.
B Y F ORKLIFT
Figure 7: Transporting the Work Platform
Forklift from the rear of the machine
using the forklift pockets provided. If
necessary, the machine may be fork-
lifted from the side by lifting under the
Chassis Modules.
B Y T RUCK
1. Maneuver the work platform into
transport position and chock the
wheels. The platform must be in
the fully lowered position for trans-
port.
2. Secure the work platform to the
transport vehicle by attaching
chains or straps of adequate load
capacity to the front and rear Tie
Downs.
T RANSPORTING T HE W ORK P LATFORM
W A R N I N G ! !
Forklifting is for transporting only.
See specifications for weight of the work platform and be certain that forklift is
of adequate capacity to lift the platform.
Rear Tie Down/Lift Lugs
Front Tie Down Lugs
Lift Lugs
REAR
Forklift Pockets
FRONT
C A U T I O N ! !
Front tie down lugs are not to be used to lift work platform.
Overtightening of chains or straps attached to tie down lugs may result in
damage to work platform.