Snorkel UL20-sn17745+ User Manual
Operator manual, Safety rules and operating instructions, Ul20

1
UL20
Operator Manual
UL20
SERIAL NUMBERS 17745 TO CURRENT
WARNING
All personnel shall carefully read, understand and follow all safety rules, operating
instructions and the Scaffold Industry Association's MANUAL OF RESPONSIBILITIES
before performing maintenance on or operating any UpRight aerial work platform.
SAFETY RULES
Safety Rules and Operating Instructions
Safety Rules and Operating Instructions
NEVER
attempt to
move the UpRight
Lift with people or
materials on the
platform or with
the platform
elevated.
NEVER
elevate
platform unless all
four (4) outriggers
have been properly
installed. All
outrigger screwjack
pads must be in solid
contact with a firm
surface before the
platform is elevated.
NEVER
operate the machine
within ten feet of power lines.
THIS MACHINE IS NOT
INSULATED
.
NEVER
sit, climb, or stand on the
platform guardrails or midrail.
NEVER
elevate platform without
first leveling the base.
NEVER
use ladders, planks or other devices to increase the height of the platform.
NEVER
attach overhanging loads to the platform or increase the platform size.
NEVER
elevate the platform if it contains more than one person or more than the rated load (see specifica-
tions on back page).
LOOK
up, down and around for overhead obstructions and electrical conductors.
NEVER
change operating or safety systems.
NEVER
use outriggers from one model on another model.
CLOSE
and secure cage mid rail after entering platform.
INSPECT
the machine thoroughly for cracked welds, loose or missing hardware, hydraulic leaks, damaged
control or power cables and loose wire connections.
NEVER
use the machine as a freight or personnel elevator.
NEVER
recharge battery near sparks or open flame; batteries that are being charged emit highly explosive
hydrogen gas.
AFTER USE
secure the work platform against unauthorized use by turning key switch off and removing key.
NEVER
replace any component or part with anything other than original UpRight replacement parts
without the manufacturer's consent.