Snorkel AB48HSRT-sn4611+ - Manual (Page 18)

16
1. Park the unit in an appropriate location at the workplace.
2. Select Neutral, apply the Park brake to the vehicle, and leave the engine
running.
3. Lift the Outrigger control cover hatch, located at the side of the driving seat.
4.
Lower the outriggers by operating the ‘Deadman’ push button and operating
the outriggers two at a time until they are all in contact with the ground.
Do not attempt to set up the machine on steep slopes, ramps or
soft ground.
1
SETTING UP
SECTION
I
FRONT
REAR