Kinesis FSMJ4 Savant Elite Programmable Foot Pedal - Manual (Page 17)

slide the programming switch back to the right.
Right mouse button: Esc b 2
Hold Esc, tap b, then tap 2 in the number row, then release Esc. Tap the pedal again slide the
programming switch back to the right.
Scrolling (middle mouse button): Esc b 3 or Esc b 4
Hold Esc, tap b, then tap either 3 or 4 in the number row, then release Esc. In a Windows
environment, this action usually performs scrolling when the mouse is moved. If Esc b 3
doesn’t perform correctly, try Esc b 4.
Self-scroll up: Esc s 1
Hold Esc, tap s, then tap 1, then release Esc.
Self-scroll down: Esc s -1
Hold Esc, tap s, then tap minus, then tap 1, then release Esc.
When you have completed ONE of the above key sequences, tap the pedal again (the green
LED will resume steady flashing). Then proceed to program another pedal, or invert the
device and slide the programming switch back to the right.
Advanced programming features
A number of special features can be programmed. However, it is recommended to use these
features only when you have become familiar with basic operations.
Combination modifier keys (Windows only)
The user can hold down multiple modifier keys (e.g. Ctrl, Shift, Alt, Win) with a single pedal
while entering alphanumeric keyboard keys with the fingers. For example, if you need to use
Shift+Alt in combination with another key, program Shift-Alt into the pedal. You now have
turned a 3-key combination into a simpler 2-key one, with half the combination performed by
your foot.
1. While in programming mode, tap the desired foot switch pedal.
2. Press and hold the first modifier key, press the second modifier key, then release both
keys.
3. Tap the pedal again, then exit programming mode by sliding the programming switch
right.
Change repeat rate: Esc LShift, followed by the desired key action(s)
The normal mode for a single keyboard action is to repeat with the same rate and delay
17