Synergy 8557/8558 - Dodge Steering Box Brace (94-08) - Manual (Page 4)

4) Once all 4 bolts have been started, snug them down to the point where the cross member can still be
moved to align the bearing on the cross member.
5) Center the Pitman arm stud in the hole on the cross member and install the bearing. It’s recommended
to lightly coat the pitman arm stud with Anti-seize or grease prior to assembly.
o Use the 7/16-14 x 1.50” long bolts provided in the kit to bolt the bearing to the cross-member.
Use a washer under the bolt head and under the Nylock nut as shown below.