Synergy 8154 - Jeep TJ/LJ/ZJ/XJ HD Fixed Lower Control Arms User Manual
Ppm-8154 tj/lj/zj/xj fixed length hd lca
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
PPM-8154 TJ/LJ/ZJ/XJ FIXED LENGTH HD LCA
Version 1
GENERAL NOTES:
• These instructions are also available on our website; www.synergymfg.com.
Check the website before you begin for any updated instructions and additional
photos for your reference.
• These control arms are ¼” longer than stock to help correct caster and driveline
angles on lifted Jeep vehicles.
Installation:
1. Remove the existing lower control arms. If you are just replacing the lower control
arms, they can be replaced one at a time with the vehicle sitting on level ground,
without removing the tires & wheels or any other suspension part.
2. Reuse the factory mounting bolts. Install the arm so that the side with the offset
notch is at the axle end with the flush end of the arm positioned closest to the ground
as pictured below. This allows for greater droop travel and a smooth surface to slide
over rocks and terrain.
- 3427 - Univ Jeep Shock Stem Adapter (1 page)
- 4012 - Jeep JK Spare Tire Relocation Bracket (1 page)
- 4018 - Jeep JK Compressor Mount (3 pages)
- 4018-RHD - JK Onboard Air Compressor Bracket RHD (Viair & ARB) (4 pages)
- 4024 - Jeep JK Air Tank Mount (2 pages)
- 4034 - Air Compressor Bracket 12+ JK w/ 3.6L Pentastar (4 pages)
- 4040 - Synergy Sit Shower Shave Kit (21 pages)
- 4105 / 6 - D60 Drive Gears (1 page)
- 4120 Series - Heavy Duty Ball Joints (1 page)
- 4121/21-01 - Heavy Duty Ball Joints (1 page)
- 4122/22-01 - Heavy Duty Ball Joints (1 page)
- 4124 - Heavy Duty Ball Joints (2 pages)
- 4125 - HD Ball Joints for 80-96 Ford Bronco, F150, F250 (1 page)
- 4128 - Heavy Duty Ball Joints (1 page)
- 4129/29-01 - Jeep XJ Heavy Duty Front Ball Joints (2 pages)
- 413402 - Low Misalignment Tie Rod End Dust Boot (3 pages)
- 414X - GM HD Ball Joints (1 page)
- 5000 - Jeep TJ Front Coilover Bracket Kit (4 pages)
- 5011 - Jeep JK Front Coil Over Mounting Kit (17 pages)
- 5011-03 - Jeep JK Front Air Bump Mounting Kit (5 pages)
- 5012 - Jeep TJ/YJ/CJ Universal Shock Hoop (6 pages)
- 5013 - Jeep JK Rear Coilover Kit (13 pages)
- 5014-A - Jeep JK Rear Air Bump Kit (10 pages)
- 5016 - Jeep JK Unlimited Three Seat Bracket (7 pages)
- 5017 - 2012+ Jeep JK Exhaust Spacer Kit (9 pages)
- 5019 - Jeep JK Thru Coil Front Air Bump Kit (10 pages)
- 5021 - Jeep JK Heavy Duty Front Lower Control Arm Frame Bracket (10 pages)
- 5022-02 - Jeep JK Frame Side RLCA Gusset Kit (12 pages)
- 5051 - Front 3 Link Kit for Jeep TJ (16 pages)
- 5052 - Rear 4 Link Kit (Bronco, Jeep CJ, TJ, YJ, Universal) (10 pages)
- 5102-0X - Jeep JK Louvered Hood Panel (13 pages)
- 5103 - Jeep JK License Plate Delete Panel (3 pages)
- 5203 - Jeep TJ/LJ Front Cage Kit (10 pages)
- 5204 - Jeep TJ Rear Cage Kit (6 pages)
- 5205 - TJ/LJ Cage Tie-In Kit (4 pages)
- 5210 - Jeep LJ/TJ Cage Kit (8 pages)
- 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit (51 pages)
- 5221-A - 2011+ Jeep JK 2/4 Door Front Cage Kit (61 pages)
- 5222-04 - Jeep JK 2 Door Weld-In Harness Bar (6 pages)
- 5222-A - Jeep JK 2 Door Rear Cage Kit (10 pages)
- 5223 - JK 4 Door B-Pillar Cage Kit (15 pages)
- 5224-A - Jeep JK 4 Door Rear Cage Kit (11 pages)
- 5232-3 - Jeep YJ Rear Cage Kit (8 pages)
- 523X - Jeep YJ Cage Kit (14 pages)
- 5310 - Jeep JK Rear Bumper (10 pages)