Synergy 8009-40 - Jeep JK Front Axle Re-Tube Kit - Manual (Page 7)

• The following table can be used for reference for re-installing the
suspension components back onto the axle. Torque all control arm and
track bar hardware with the vehicle on the ground under full weight.
*** Be sure to add gear oil to differential before driving ***
Front Suspension
DESCRIPTION
N·m Ft. Lbs In. Lbs.
Shock Absorber Upper
Nut 27 20 -
Shock Absorber Lower
Nut 76 56 -
Suspension Arm Lower
Axle Bracket Nut 169 125 -
Suspension Arm Lower
Fram Bracket Nut 169 125 -
Suspensions Arm Upper
Axle Bracket Nut/Bolt 102 75 -
Suspension Arm Upper
Frame Bracket Bolt 102 75 -
Stabilizer Bar Retainer
Bolts 61 45 -
Stabilizer Bar Link
Upper Nut 102 75 -
Stabilizer Bar Link
Lower Bolt 102 75 -
Track Bar Frame
Bracket Nut 169 125 -
Track Bar Axle Bracket
Bolt 169 125 -
Hub/Bearing Bolts 102 75 -
Hub/Bearing Axle Nut 136 100 -
Jounce Cup Bolt 42 31 -
Drag link to Knuckle
(Right Side) 74 55 -
Drag link to Knuckle 74 55 -
Axle Shaft Nut 136 100 -
Wheel Speed Sensor 4-6 - 34-50
Synergy Suspension
870 Industrial Way
Suite B
San Luis Obispo, CA 93401
Ph. (805)-242-0397
www.synergymfg.com