Synergy 5713 / 14 - Jeep JK 2/4 Dr Gas Tank Skid - Manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
5713 / 5714 JK HEAVY DUTY GAS TANK SKID PLATE
Version 1.1
GENERAL NOTES:

These instructions are also available on our website; www.synergymfg.com. Check the website before
you begin for any updated instructions and additional photos for your reference.

This skid plate assembly is designed to be used along with the Synergy 5710 Jeep JK skid plate
assembly or can be used with the stock cross member and skid plates. We make no claims that this skid
plate will work with any other aftermarket skid plates and is up the purchaser and installer to make it
work.

These installation instructions are for both 2 and 4 door JK models.

We recommend that you perform this installation with a close to empty gas tank, or empty it before you
drop the tank. A full fuel tank is very heavy.
PARTS LIST:

5714 JK 4DR Gas Tank Skid
 (1) 5714-01 4DR Gas Tank Skid Plate
 (1) 5714-03 Gas Tank Skid Rear Inner Bracket
 (1) 5714-04 Gas Tank Skid Mid Inner Bracket
 (1) 5714-05 Gas Tank Skid Front Inner Bracket
 (1) 5714-06 Gas Tank Skid Rear Outer Bracket
 (2) 5714-07 Gas Tank Skid Front / mid outer bracket
 (1) 5714-11 Stock Cross member adapter
 (1) Hardware kit
o (5) ½-13 UNC x 1.25” long hex head bolt
o (6) ½-13 UNC Flange nut
o
(5) ½” Flat washer
o (1) ½-13 UNC x 1.25” long flat head socket cap screw
o (3) 3/8-16 UNC x 1” long flat head socket cap screw
o (10) 3/8-16 UNC Flange nut
o (7) 3/8-16 UNC x 1” long hex head bol
o (7) 3/8” flat washer

5713 JK 2DR Gas Tank Skid
 (1) 5713-01 2DR Gas Tank Skid Plate
 (1) 5713-02 Gas Tank Skid Front Inner Bracket
 (1) 5714-03 Gas Tank Skid Rear Inner Bracket
 (1) 5714-06 Gas Tank Skid Rear Outer Bracket