Synergy 5410 - Jeep JK Front Bumper User Manual
Ppm-8410 jk front bumper install instructions
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
PPM-8410 JK FRONT BUMPER INSTALL
INSTRUCTIONS
Version 1
GENERAL NOTES:
• These instructions are also available on our website; www.polyperformance.com.
Check the website before you begin for any updated instructions and additional
photos for your reference.
• The Polyperformance JK front bumper system is a bolt on installation but does
require minor trimming and cutting with a sawzall or cut off wheel.
• The winch mount requires the use of a hawse fairlead, a roller fairlead does not
fit in the bumper.
1. Remove the splash shield and disconnect the fog light connectors if equipped.
Remove the stock bumper, tow hooks and upper frame trim.
2. Loosely install the new Poly Performance front bumper using the carriage head
bolts. The lower outer hole of the front frame bumper mounting plate needs to be
trimmed with a sawzall or cut off wheel. Mark the frame plate along the weld on
the backside of the bumper and trim.
- 3427 - Univ Jeep Shock Stem Adapter (1 page)
- 4012 - Jeep JK Spare Tire Relocation Bracket (1 page)
- 4018 - Jeep JK Compressor Mount (3 pages)
- 4018-RHD - JK Onboard Air Compressor Bracket RHD (Viair & ARB) (4 pages)
- 4024 - Jeep JK Air Tank Mount (2 pages)
- 4034 - Air Compressor Bracket 12+ JK w/ 3.6L Pentastar (4 pages)
- 4040 - Synergy Sit Shower Shave Kit (21 pages)
- 4105 / 6 - D60 Drive Gears (1 page)
- 4120 Series - Heavy Duty Ball Joints (1 page)
- 4121/21-01 - Heavy Duty Ball Joints (1 page)
- 4122/22-01 - Heavy Duty Ball Joints (1 page)
- 4124 - Heavy Duty Ball Joints (2 pages)
- 4125 - HD Ball Joints for 80-96 Ford Bronco, F150, F250 (1 page)
- 4128 - Heavy Duty Ball Joints (1 page)
- 4129/29-01 - Jeep XJ Heavy Duty Front Ball Joints (2 pages)
- 413402 - Low Misalignment Tie Rod End Dust Boot (3 pages)
- 414X - GM HD Ball Joints (1 page)
- 5000 - Jeep TJ Front Coilover Bracket Kit (4 pages)
- 5011 - Jeep JK Front Coil Over Mounting Kit (17 pages)
- 5011-03 - Jeep JK Front Air Bump Mounting Kit (5 pages)
- 5012 - Jeep TJ/YJ/CJ Universal Shock Hoop (6 pages)
- 5013 - Jeep JK Rear Coilover Kit (13 pages)
- 5014-A - Jeep JK Rear Air Bump Kit (10 pages)
- 5016 - Jeep JK Unlimited Three Seat Bracket (7 pages)
- 5017 - 2012+ Jeep JK Exhaust Spacer Kit (9 pages)
- 5019 - Jeep JK Thru Coil Front Air Bump Kit (10 pages)
- 5021 - Jeep JK Heavy Duty Front Lower Control Arm Frame Bracket (10 pages)
- 5022-02 - Jeep JK Frame Side RLCA Gusset Kit (12 pages)
- 5051 - Front 3 Link Kit for Jeep TJ (16 pages)
- 5052 - Rear 4 Link Kit (Bronco, Jeep CJ, TJ, YJ, Universal) (10 pages)
- 5102-0X - Jeep JK Louvered Hood Panel (13 pages)
- 5103 - Jeep JK License Plate Delete Panel (3 pages)
- 5203 - Jeep TJ/LJ Front Cage Kit (10 pages)
- 5204 - Jeep TJ Rear Cage Kit (6 pages)
- 5205 - TJ/LJ Cage Tie-In Kit (4 pages)
- 5210 - Jeep LJ/TJ Cage Kit (8 pages)
- 5221 - 07-10 Jeep JK 2/4 Door Front Cage Kit (51 pages)
- 5221-A - 2011+ Jeep JK 2/4 Door Front Cage Kit (61 pages)
- 5222-04 - Jeep JK 2 Door Weld-In Harness Bar (6 pages)
- 5222-A - Jeep JK 2 Door Rear Cage Kit (10 pages)
- 5223 - JK 4 Door B-Pillar Cage Kit (15 pages)
- 5224-A - Jeep JK 4 Door Rear Cage Kit (11 pages)
- 5232-3 - Jeep YJ Rear Cage Kit (8 pages)
- 523X - Jeep YJ Cage Kit (14 pages)
- 5310 - Jeep JK Rear Bumper (10 pages)