Synergy 5021 - Jeep JK Heavy Duty Front Lower Control Arm Frame Bracket User Manual

Page 10

Text mode
Original mode

16) Allow welds to cool. Deburr welds and paint to prevent corrosion.
17) Installation on the passenger side is complete. Installation on the driver’s side follows the same

procedure as the passenger side. The only difference is the exhaust makes for slightly less room to work
in. Installation can be done with exhaust in place, however for easier installation, remove factory Y-
pipe to gain clearance.

18) If desired, remove the factory Y pipe using the factory service manual as a guide. You can also

reference

PPM-5017 instructions

for details.

19) Follow the same procedure used on the passenger side.
20) Reinstall all lower control arm bolts and torque to mfg or stock specifications (125 ft-lbs for OEM or

Synergy)

Installation is Complete