Lukas LS 330 Fi - Manual (Page 12)

12
The equipment is connected to the hydraulic pump via quick-disconnect-coupling halves
(male and female).
Before coupling unlock the connect socket by turning the sleeve into position X. Retract sleeve
and connect plug and socket. Release sleeve and turn it into position Y. The connection has
now been established and secured. Uncoupling is done in the reverse order.
WARNING / CAUTION!
Some of the plug couplings have special functions and must therefore not be
unscrewed from the hose lines and/or swapped round!
X
Y
To protect them from dust, the accompanying dust protection caps must be put back on.
REMARK:
Coupling of the devices is only possible, when the hoses are depressurized.
5.3 Coupling the plug couplings
CAUTION!
Always connect the return line first and afterwards the supply line!