CompuSTAR RF-2W940-SS (Remote 2W940R-SS) - Manual (Page 5)

FeatureTurns Feature On or Off Button Duration Remote Chirp(s) Function / Description
Enter and Exit
2.5 Seconds
Five On | Enters and Exits Remote Option Menu.
Remote Menu Two Seconds Off The lock and unlock LEDs will flash red or blue depending on options set.
2 Way Paging
Half second
One-Half Paging |
Determines whether your remote is used for Alarm or Start Only system.
Display Two-Full Paging
Set it to FULL for ALARM IT and MAX IT features.
Set to HALF for START IT ONLY systems. If on, the Lock LED will change to blue.
Vibrate Half second One On | Two Off Turns the silent mode on or off. If on, the Unlock LED will change to blue.
2nd Car Mode Half second One On | Two Off
Puts your remote into 2nd Car Mode. You can control another vehicle with the same
remote as long as it has the same RF Kit installed. If on, the Trunk LED will illuminate blue.
Automatic
Locks all buttons on the remote automatically after one minute.
Button Lock
Half second One On | Two Off Tap any button then the button(s) you would like to use to send a command
from the remote to your vehicle. If on, the Start LED will illuminate blue.
Quick Reference
r ” @o”‰Ž@m Ž•@r‚Œ
9 By Firstech, LLC
Quick Reference
Q@w™@r ” @b•””Ž@f•Žƒ”‰Ž“
By Firstech, LLC 10
Button Duration Function / Description
1.0 second Lock/Arm. LED will come on solid then flash.
Twice within 1.0 second
Tap the button twice within 1 second and the system will
unlock/disarm the vehicle
3 second hold
When your vehicle is off, hold for 3 seconds to start.
Repeat to shut your vehicle off.
5 taps Takes system out of Valet Mode. Will not put into Valet Mode