Lull 1044C-54 Series II Operation Manual - Manual (Page 56)

Section 3 - Controls and Indicators
3-22 31200608
3.8 INDICATORS
Boom Angle and Extension Indicators
• The boom angle indicator (1) is located on the left side of the boom. Use this
indicator to determine the boom angle when using the capacity chart (see “Use
of the Capacity Chart” on page 5-4).
• Boom extension indicators (2) are located on the left side of the boom. Use these
indicators to determine boom extension when using the capacity chart (see “Use
of the Capacity Chart” on page 5-4).
Transfer Carriage Extension
• The transfer carriage indicators (3) are located on the left main frame rail and
right cab wall. Use these indicators to determine transfer carriage extension
when using the capacity chart (see “Use of the Capacity Chart” on page 5-4).
OV0290
2 1
A B D C
-10 0 1020 30
40 50
60 7
08
0
3
OV0280