Lull 1044C-54 Series II Operation Manual - Manual (Page 100)

Section 5 - Attachments
5-32 31200608
Truss Boom
Use Appropriate Truss Boom Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-3.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The middle joystick (1) controls lift/lower and extend/retract movement of the boom.
The front joystick (2) controls truss boom tilt.
• Move joystick back to tilt up.
• Move joystick forward to tilt down.
Winch Control (if equipped):
The auxiliary hydraulic button (3) on the front joystick enables the truss boom
mounted winch.
• While depressing button move joystick left to lower cable.
• While depressing button move joystick right to raise cable.
OY0570
OV0400
2
1
3