Lull 1044C-54 Series II Operation Manual - Manual (Page 43)

Section 3 - Controls and Indicators
3-9 31200608
Gear Selection
Gear selection is located on the twist grip handle (2) of transmission control lever.
• Twist hand grip to select gear.
• Select the appropriate gear for the task being performed. Use a lower gear
when transporting a load. Use a higher gear only when driving unloaded for
longer distances.
• Slow down prior to downshifting. Do not downshift more than one gear at a
time.
Neutral Lock
Neutral lock lever (3) locks transmission control lever.
• To lock the transmission control lever in the neutral position, place the
transmission control lever in neutral and move neutral lock lever to the “N”
position (4).
• To unlock, move the neutral lock lever to the “D” position (5).
OV0170
2
1st
4th
2nd
3rd
OV0180
4
N D
3
N D
5