Lull 1044C-54 Series II Operation Manual - Manual (Page 31)

Section 2 - Pre-Operation and Inspection
2-7 31200608
5. Cab and Electrical -
• General appearance; no visible damage.
• Frame level indicator and window glass undamaged and clean.
• Gauges, switches, joysticks, foot controls and horn operational.
• Check seat belt for damage, replace belt if frayed or cut webbing, damaged
buckles or loose mounting hardware.
6. Main Control Valve (under cab floor) - See Inspection Note.
7. Air Cleaner - Air cleaner element condition indicator, check for clogged
condition. Replace element as required.
8. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
9. Rear Axle Oscillation Cylinder - Pins secure; hydraulic hoses undamaged, not
leaking.
10. Rear Axle - Steer cylinders undamaged, not leaking; pivot pins secure;
hydraulic hoses undamaged, not leaking.
11. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
12. Engine Compartment -
• Drive belts, check condition and replace as required.
• Engine mounts - See inspection note.
• Battery cables tight, no visible damage or corrosion.
• Engine access doors (if equipped) closed and properly secured.
13. Transfer Carriage - See inspection note. Transfer carriage cylinder pins secure;
hydraulic hoses undamaged, not leaking.
14. Mirror - Clean and undamaged.
15. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
16. Frame Level Cylinder - Pins secure; hydraulic hoses undamaged, not leaking.
17. Right Outrigger - Pins secure; hydraulic hoses and cylinder undamaged, not
leaking.
18. Attachment - Properly installed, see “Attachment Installation” on page 5-9.