Lull 1044C-54 Series II Operation Manual - Manual (Page 39)

GENERAL OPERATING PROCEDURES
31
Connecting an Attachment
1. With quick attach (5) rotated fully downwards,
extend the boom until quick attach pivot pin (6) is
properly aligned underneath the attachment (7).
2. Raise the boom to engage the quick attach pivot
pin (6) with the attachment (7).
3. Rotate the quick attach (5) upwards to engage
the attachment (7).
4. Shut off engine.
5. Check to see that the lock plate (3) is engaged
ahead of the attachment stop (4).
6. Connect attachment hydraulic hoses (if
equipped).
MAKE SURE
ATTACHMENT IS
SECURELY CONNECTED
TO QUICK ATTACH.
ATTACHMENT MAY FALL
AND CAUSE SERIOUS
PERSONAL INJURY OR
DEATH!
WARNING