Lull 1044C-54 Series II Operation Manual - Manual (Page 21)

INSTRUMENTS AND CONTROLS
13
Hourmeter
(12)Hourmeter—Located on the instrument panel to
the left of the Gauge and Light Cluster. Registers
total hours of vehicle operation.
IGNITION SWITCH
Ignition Switch Location
The ignition switch (13) is located on the dash, near the
right side.
Ignition Switch Positions
Note: The starter will not engage unless the park
brake is applied and the shift selector is placed
in the NEUTRAL position.
The ignition switch has four positions:
(14)OFF: The key may be removed or inserted only
at this position. The engine and all electrical
circuits except the horn circuit are shut down at
this position.
(15)ON: All electrical circuits except the engine
starter circuit are operational.
(16)START: Activates the engine starter. When the
key is released the switch will return to the ON
position and remain there.
(17)This position is reserved for future use and
currently has no function.
THROTTLE
Engine Throttle Pedal
Push throttle pedal (18) down to increase engine speed.
0 0 0 0 0
HOURS
1
10
QUARTZ
12
H1057
13
H1007
H1021
14
17
16
15
OV0010
18