Lull 1044C-54 Series II Operation Manual - Manual (Page 22)

14
INSTRUMENTS AND CONTROLS
BRAKE PEDAL
Service Brake Pedal
Push brake pedal (1) down to slow or stop vehicle.
DRIVE LOCKOUT OVERRIDE FOOT
SWITCH
Drive Lockout Override Foot Switch
The drive lockout override switch (2) is located on the
cab floor, to the left of the brake pedal. See “Stability
Systems” on page 32 before using this switch.
PARK BRAKE CONTROL
Park Brake Control
Pull knob (3) out (toward you) to engage the park brake.
Push knob in to disengage the park brake.
Important: Always stop the vehicle with service
brakes before engaging park brake. Do
not use the park brake to slow or stop
the vehicle EXCEPT in an emergency.
Note: When park brake is engaged, transmission will
default to NEUTRAL, regardless of shift selector
position.
OV0010
1
OV0020
2
WARNING
Read, understand, and follow the
instructions starting on page 32 of this
manual BEFORE using the Drive Lockout
Override System. Failure to follow the
instructions in this manual may result in
death or serious personal injury!
3
H1007