Apple Shake 3.5 - Manual (Page 8)

8 Installing Shake 3.5
Shake Qmaster System Requirements
Before you install any of the Shake Qmaster software, ensure that your system meets the
following minimum requirements.
In the installer, you’ll find that there are two separate installation components for
Shake Qmaster: Shake Qmaster Applications and Shake Qmaster Services. Each component
is designed for a different part of a Shake Qmaster system. As detailed later in “Installing
Shake Qmaster” on page 9, you install the Shake Qmaster Applications on client and
administrator computers, and Shake Qmaster Services on cluster computers.
Minimum Requirements for Shake Qmaster Applications
The Shake Qmaster Applications installation component has the following minimum
requirements.
Minimum Hardware Configurations
The Shake Qmaster Applications component requires, at a minimum, either of the following
hardware configurations:
m 500 Mhz or higher PowerPC G3
m 500 Mhz or higher PowerPC G4
The following disk space is required:
m 20 MB of disk space
Minimum Software Configuration
m Mac OS X 10.3.2 (or later)
m QuickTime 6.5 (or later)
m 256 MB of RAM
Minimum Requirements for Shake Qmaster Services
The Shake Qmaster Services installation component has the following minimum
requirements.
Minimum Hardware Configurations
The Shake Qmaster Services require, at a minimum, either of the following hardware
configurations:
m 500 Mhz or higher Power PC G4 or PowerBook
m 1 Ghz Power PC G4 or higher XServe
The following disk space is required:
m 1 GB local disk space for caching and temporary files
m 3 MB of local disk space for the software